Driveshaft gaiter check (Every 12 months - regardless of mileage)

Routine maintenance and servicing / Driveshaft gaiter check (Every 12 months - regardless of mileage)

With the vehicle raised and securely supported on stands, turn the steering onto full lock, then slowly rotate the roadwheel.

Inspect the condition of the outer constant velocity (CV) joint rubber gaiters, squeezing the gaiters to open out the folds. Check for signs of cracking, splits or deterioration of the rubber, which may allow the grease to escape, and lead to water and grit entry into the joint. Also check the security and condition of the retaining clips. Repeat these checks on the inner CV joints (see illustration). If any damage or deterioration is found, the gaiters should be renewed (see Chapter 8).

10.1 Check the condition of the driveshaft gaiters

At the same time, check the general condition of the CV joints themselves by first holding the driveshaft and attempting to rotate the wheel. Repeat this check by holding the inner joint and attempting to rotate the driveshaft. Any appreciable movement indicates wear in the joints, wear in the driveshaft splines, or a loose driveshaft retaining nut.