Headlight washer system components - removal and refitting

Body electrical system / Headlight washer system components - removal and refitting

Washer system reservoir 1 Refer to Section 14. Two pumps are fitted to the reservoir, the larger one being the headlight washer pump.

Washer pump
2 Remove the washer reservoir as described in paragraph 1.

3 Carefully ease the pump out from the reservoir and recover its sealing grommet.

Wash off any spilt fluid with cold water.

4 Refitting is the reverse of removal, using a new sealing grommet if the original one shows signs of damage or deterioration. Refill the reservoir and check the pump grommet for leaks.

Washer jets
5 If necessary for improved access to the jet retaining nut, remove the front bumper as described in Chapter 11.

6 Disconnect the washer tubing then unscrew the mounting nut and remove the jet from the bumper.

7 Refitting is the reverse of removal making sure that the washer jets are correctly aimed at the headlight.